- This topic has 9 replies, 2 voices, and was last updated 6 years, 4 months ago by
.
-
Posts
-
Hi, has anyone come across this. The small oven switch is faulty and I bought a genuine replacement. The original has 5 spade connections, the new part has 7. It’s not a terminal for terminal replacement, but has the correct part number so has been altered by Cda. How do you connect it? I twice but the oven didn’t work in either configuration.
Thanksare the terminals numbered on the old one
if yes may correspond to numbers on the new onewhere did you get the switch from ?
Dave
Switch came from Uk white goods. Both switches have numbered terminals, but they don’t all fall on connections, so where there’s a 3b on one that’s connected, the 3b on the other is a space for example. There are more terminals available than wired connections on the new switch, but the spaces don’t correspond, hence it’s not one for one.
Have you emailed shop to check
sometimes manufacturers fit different part before and after a serial number
Dave
Yes I’ve double checked with them. The schematic of the cooker shows the original 5 connector switch with the same part number as supplied, but the new switch is 7 connector. Other sites have the same switch available, but none have details of how to connect. None that I’ve found anyway.
is it this switch you have got ?
https://shop.ukwhitegoods.co.uk/050030-oven-function-selector-switch
Dave
this seems to be delonghi built so the often put part numbers on the switches
so what part no is on the old one ?
Dave
- You must be logged in to reply to this topic.