Beko Dishwasher DFN28J20X – not heating up

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko Dishwasher DFN28J20X – not heating up

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • January 28, 2020 at 8:43 pm #97116
    drewbeaton
    Participant

    Hi,

    Our dishwasher has started heating up. It seems to run as normal. I can hear the water rinsing the dishes & it’s draining fine.

    However, the dishes are wet & there was significant grease build up in the drain. After running drain cycles, I’ve just noticed that it does not appear to heat up.

    Whats the most likely fault? Heating element, thermostat? If so, are they fairly easy to access for an enthusiastic amateur? Are the parts easy to obtain?

    Thanks in advance for all advice and help offered.

    January 28, 2020 at 10:08 pm #466188
    electrofix
    Moderator

    it is most likely the heater but you would have to check

    access is not too bad from front and taking off bottom tray

    heater is on right hand side on the hose leading to the wash motor

    https://shop.ukwhitegoods.co.uk/hs81596-compatible-dishwasher-heating-element

    effectively 2 hoses with clips and 3 wires

    Dave

    January 28, 2020 at 10:52 pm #466189
    drewbeaton
    Participant

    Thanks – I’ll take it off and test it.

    February 2, 2020 at 10:11 pm #466190
    drewbeaton
    Participant

    electrofix wrote:it is most likely the heater but you would have to check

    access is not too bad from front and taking off bottom tray

    heater is on right hand side on the hose leading to the wash motor

    https://shop.ukwhitegoods.co.uk/hs81596-compatible-dishwasher-heating-element

    effectively 2 hoses with clips and 3 wires

    Dave

    Fixed. Thanks for your help.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.