- This topic has 8 replies, 4 voices, and was last updated 20 years, 10 months ago by
.
-
Posts
-
I just got a new motor in my washer/dryer.
Trouble is that when it gets to the rinse cycle it just stops dead.
If I then turn it off and on again it continues from where it left off and finishes the cycle perfectly.
Does anyone have any idea what could be wrong now?
Re: Neff Washer Dryer stopping mid -programme
Model number (Enr????) from inside the door or on the back please Cathy 😀
Dave.
Re: Neff Washer Dryer stopping mid -programme
Hi Dave, the number is V438OXOGB/12.
Since I posted I have done 2 more washes both of which ran fine but I would still welcome any comments you have.
Re: Neff Washer Dryer stopping mid -programme
cathykirby wrote:Since I posted I have done 2 more washes both of which ran fine
It may have been an air lock or something similar 😉
If it ain’t broke, don’t worry about it 😀
Dave.
Re: Neff Washer Dryer stopping mid -programme
Unfortunately it’s doing it again .
I guess I’ll have to get the engineer back – again 🙁Re: Neff Washer Dryer stopping mid -programme
Cathykirby wrote:Unfortunately it’s doing it again .
Have you pressed the ‘Rinse Hold’ button by mistake?
Re: Neff Washer Dryer stopping mid -programme
The light isn’t on for rinse hold but also it spins before stopping so although it’s stopped on rinse it isn’t really a rinse hold if you see what I mean.
It seems to function fine at 60 degrees but not at 40.
Re: Neff Washer Dryer stopping mid -programme
Could be a kinked inlet/outlet hose from whem m/c was pushed back after motor was fitted.
- You must be logged in to reply to this topic.