Hisense FV306N4BC1 Freezer Temperature

Home › Forums › Public Support Forums › Help And Support › Fridge And Freezer Forum › Hisense FV306N4BC1 Freezer Temperature

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • March 30, 2020 at 8:54 pm #97398
    dekor8tor1
    Participant

    Hi Need some help on this freezer as it is not getting to the required temperature even on the lowest setting i am only getting minus 8 on the digital thermometer that i have put in
    the fan is working any help would be appreciated

    March 30, 2020 at 10:38 pm #467466
    electrofix
    Moderator

    on this freezer it seems you can set the frezer temp from -14 to -24

    when you say you set it to the lowest setting do you mean

    a the lowest setting -14

    b the lowest temp setting -24

    Dave

    March 31, 2020 at 11:02 am #467467
    dekor8tor1
    Participant

    Hi Dave at the moment the freezer is set on the highest setting but the digital thermometer i have put in one of the drawers is reading minus 13
    thanks for your reply

    March 31, 2020 at 1:24 pm #467468
    electrofix
    Moderator

    is the compressor running all the time ?

    Dave

    March 31, 2020 at 6:32 pm #467469
    dekor8tor1
    Participant

    Hi Dave
    The compressor does run for a long time but it does turn off if i set the temp to minus 18 which is supposed to be the ideal setting any ice cream in the freezer doesnt freeze properly
    thanks Richard

    March 31, 2020 at 7:26 pm #467470
    electrofix
    Moderator

    in that case it sounds like a sensor problem

    if it was a compressor or a gas problem the comp would run all the time as it would never reach temp. in your case it turns off which means as far as the control is concerned it has got there
    has your freezer got a fan and if yes is it runing.. if your unit self defrosts they add a fan to blow the cold air around

    Dave

    March 31, 2020 at 8:20 pm #467471
    dekor8tor1
    Participant

    hi Dave yes fan is running i did change a temperature sensor but it made no difference i have took the cover of the back and everything looks ok

    March 31, 2020 at 9:01 pm #467472
    electrofix
    Moderator

    well if the sensors are new and the fan work plus the compressor stop and starts the only thing left is the boards

    cant be 100{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} certain as you realise and i have no tech access on this chinese make

    Dave

    March 31, 2020 at 9:06 pm #467473
    dekor8tor1
    Participant

    ok thanks for your help Dave

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.