- This topic has 5 replies, 2 voices, and was last updated 6 years ago by
.
-
Posts
-
We have a Beko DW601 Dishwasher which until yesterday was working fine with no faults or issues apparent. The machine was running a wash cycle when we had a power outage. It was still turned on when the power came back on a couple of hours later but when we checked it the lights had gone out and it no longer works. I know there is no thermal fuse in these. Would a power outage or more likely the sudden return of power while it was running have burned something out? I have looked at the wiring and it all appears to be intact with no burning or breakages.
its unlikely any wires will have burnt out
check the socket its plugged into if that is ok it will probably be a board problem as power surges can take out electronic circuitsDave
Thanks. That’s what I feared. The socket is fine. It’s 8 years old so looks like it’s time for a new one.
Is there any way to test it to confirm that’s what it is? Being on lock down is going to make getting a replacement awkward for now.
only if you have technical equipment and knowledge
an engineer would have to check if the power was getting to the control board and if yes if the low voltage was present on the board to supply the components
Dave
- You must be logged in to reply to this topic.