Neff S5143X0GB/45 Tap & Rinseaid light flashing

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Neff S5143X0GB/45 Tap & Rinseaid light flashing

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • April 17, 2020 at 2:31 pm #97493
    Toni
    Participant

    Hi,
    I went to this one last week and the heat pump and pcb were faulty (Both visibly blown)
    Changed both parts, then the tap & rinseaid lights flash and nothing else happens
    I checked the old pcb and it had blown where the connector to the flow meter is, so I changed the flow meter yesterday but its still the same
    The original fault was that the machine was dead (No lights)
    Is there some way of resetting the fault codes on this or am I missing something
    This lady is a nurse so would really like to get it sorted if possible

    Thanks
    Toni

    April 17, 2020 at 5:22 pm #468003
    electrofix
    Moderator

    assume you have fiited correct programmed board part no 12013621

    what other components are plugged in the same connector of flow meter


    Dave

    April 17, 2020 at 5:33 pm #468004
    Toni
    Participant

    Hi Dave,

    Yes definitely the correct board, (That part number)
    as to other components I am not sure at the moment but I think it goes to the salt container from memory

    April 17, 2020 at 6:26 pm #468005
    electrofix
    Moderator

    since i did not see the connector damage was wondering if other components got damage

    do you know what caused connector to fail as it cant be current on that connector

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.