bosch WAB28161GB/01

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › bosch WAB28161GB/01

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • May 13, 2020 at 6:37 pm #97621
    suedehead1
    Participant

    hi,
    it has an E21 fault I replaced the brushes and checked the motor but I cannot clear the fault code. I have tried the usual 6 oclock thing
    but to no avail.
    any ideas welcomed

    May 13, 2020 at 6:42 pm #468675
    electrofix
    Moderator

    is that the only one you have tried i thinlk there are 3 different reset routines

    Dave

    May 13, 2020 at 6:53 pm #468676
    electrofix
    Moderator

    try

    wab machines
    1) Close the door (The following operational sequence must take place after switching on the appliance)
    2) Set program selector to OFF position
    Wait for at least 2s
    3) Set program selector switch to position 15 while the Start/Pause button is pressed until display is active
    4) Release Start/Pause button
    All remanent errors will be reset

    Dave

    May 13, 2020 at 8:10 pm #468677
    suedehead1
    Participant

    didnt try that one I will give it a go thanks

    May 14, 2020 at 9:16 pm #468678
    suedehead1
    Participant

    that worked thanks very much

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.