Candy grand vita e21

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Candy grand vita e21

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • June 2, 2020 at 3:13 pm #97740
    Am Appliances
    Participant

    Does any one know what the e21 code is on a 9kg candy grand vita condenser dryer please?

    June 2, 2020 at 4:46 pm #469273
    kaibart
    Moderator

    See attached picture kai

    June 5, 2020 at 10:26 am #469274
    Am Appliances
    Participant

    Do you know where the pressure switch is located this dryer has no pump tray at the bottom?

    June 5, 2020 at 2:16 pm #469275
    electrofix
    Moderator

    will need to complete service number and model number to look the unit up

    label inside door

    Dave

    June 5, 2020 at 2:36 pm #469276
    Am Appliances
    Participant

    Hi its GVSC9DG80. SER NO 3110082819100204

    June 5, 2020 at 6:53 pm #469277
    electrofix
    Moderator

    pressure sw is next to the motor. it monitors the sump in case it overfills. are you sure its draining ok ?

    Dave

    June 5, 2020 at 11:49 pm #469278
    Am Appliances
    Participant

    It starts cycle sometimes flashes the error straight away or will throw the code up after a while but no heat in dryer also, I’ve had the heater relay rrplaced on the module as I know that is a common fault, I will strip it down to get to the switch, don’t get a water full light just the error code. This model has no pump its tray at bottom.

    June 6, 2020 at 12:12 am #469279
    Am Appliances
    Participant

    Do you know if its a microswitch or is it a sensor, can it be tested with meter?, ,I havent touched any hoover/candy appliances for years so sorry for all the questions

    June 6, 2020 at 12:27 am #469280
    electrofix
    Moderator

    think Kai may have got error code wrong

    think it should be

    Dave

    June 6, 2020 at 11:03 am #469281
    Am Appliances
    Participant

    Heater relay has been replaced is the thermo fuse the black one on ducting behind front panell or is it the round white one to the left of it?

    June 6, 2020 at 11:26 am #469282
    electrofix
    Moderator

    thermo fuse is on top of the heater box

    Dave

    June 6, 2020 at 11:39 am #469283
    electrofix
    Moderator

    also since you seem to be trade why have you not registered for trade access ?

    we can do a lot more to help on the trade side as we then know we are dealing with someone who wont do stupid things and electrocute themselves. So we have to be careful what we say on this side of the forum

    Dave

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.