Beko DTGC8000W won’t dry any more

Home › Forums › Public Support Forums › Help And Support › Tumble Dryer Help Forum › Beko DTGC8000W won’t dry any more

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 14, 2020 at 10:53 am #97821
    cable_guy
    Participant

    Hi all

    I am Looking for some help please, my condensing beko is 2.5 years old and spins but doesn’t dry clothes.

    It’s condenser had some muck in it which I’ve now cleaned, I could be wrong but it feels as though it doesn’t heat up any more

    Any advice gratefully received

    June 14, 2020 at 11:08 am #469663
    electrofix
    Moderator

    take out the plug
    undo and remove rear cover over element
    there should be a thermostat with a red reset button, push it gently and it may go click. If yes you have reset it and it should now heat.
    If it blows again quickly then we need to figure out why it overheats

    Dave

    June 16, 2020 at 7:59 pm #469664
    cable_guy
    Participant

    electrofix wrote:take out the plug
    undo and remove rear cover over element
    there should be a thermostat with a red reset button, push it gently and it may go click. If yes you have reset it and it should now heat.
    If it blows again quickly then we need to figure out why it overheats

    Dave

    Yes lad!!!

    Thanks so much, I found the button and it worked first time. You’ve saved me £200 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.