JLWD1612 not fully functional in drying

Home › Forums › Trade Technical & Spare Parts Forums › JLWD1612 not fully functional in drying

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 23, 2020 at 3:38 pm #97884
    simtoms
    Participant

    Hi folks,
    just at a JLWD1612 91460470001 serial 60700180.
    replaced a faulty and overheated drier solenoid but cannot get drier to work beyond locking door and rotating the drum. Checked insulation of wash and dry elements, tried a new drier board and drier thermistor But still can’t get drier fully functional. No errors flagged in diagnostic cycle. Aaaaaarrrrgghh….:mad:

    June 23, 2020 at 8:20 pm #469995
    electrofix
    Moderator

    how long did you leave it as most later units take about 5 mins to start the drier as they check water first

    Dave

    June 27, 2020 at 7:17 am #469996
    simtoms
    Participant

    Hi Dave,
    sorry I didn’t realize I had a response!
    Thanks for that.
    I’ve left it 10 mins and more but it doesn’t do more than turn the drum.

    June 27, 2020 at 8:25 am #469997
    electrofix
    Moderator

    normally on the dryers of this type it takes in water from the dryer valve, then pumps it out then starts
    I take it that its not doing that

    do the dryer components work in test mode ?

    if you dont have tech access let me have your email and i will send you all thats linked to this machine

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.