- This topic has 1 reply, 1 voice, and was last updated 5 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
Hi customer asking for repair on this dryer with dc fault code is it the interlock any help appreciated thanks john
hi i called to look at this and found it was only the door plastic lug that operates the switch had snapped off , so i drilled a suitable sized hole and screwed a self tapping screw into the door , i also noticed the hinge needed the two screws tightening , i think that could have caused the lug to break off , considering the machine is only two yrs old and cost nearly £800 its a very expensive repair if you replace the door hope this helps thanks John
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.