Zanussi D/W ZDF26011WA Stopping

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Zanussi D/W ZDF26011WA Stopping

Viewing 8 posts - 1 through 8 (of 8 total)
  • Author
    Posts
  • #98137
    subs
    Participant

    PNC 91151619003
    This dishwasher was described as just stopping and not draining.
    Reset program and it drains. Put it on quick wash 30 minutes and it drained, filled, washed, released tablet, heated.
    But it washed continuously for 30 minutes, then just stopped and turned itself off, full of water and did no rinse or anything. Just filled and heated and washed for 30 minutes then ended.
    Any thoughts?

    Thanks

    Subs

    #471003
    electrofix
    Moderator

    turned itself off light and all or just stopped with lights on ?

    Dave

    #471004
    subs
    Participant

    Hi Dave, turns itself off completely. No lights.

    Thanks

    #471005
    electrofix
    Moderator

    have you tried a different socket ?

    Dave

    #471006
    subs
    Participant

    Don’t think that’s the issue. This model has an ‘auto turn off’ or something like that, where when the program ends it turns itself off. It ended a 30 minute program at 30 minutes but just turned off with no drain.

    Thanks

    Subs

    #471007
    electrofix
    Moderator

    so from that i conclude you can turn it back on instantly, you dont have to wait or turn it off at the socket etc

    had a similar fault on a bosch washer. started programme and mine turned off after 20 mins but you could not immediatly turn it back on. changed the power supply chip on the board and all is ok now

    have got tech info if you want it

    Dave

    #471008
    subs
    Participant

    When I tried to turn it back in it didn’t seem to want to turn on until I switched it off from the socket. In then came back on as normal.

    Subs

    #471009
    electrofix
    Moderator

    had a bosch washing machine doing that last week,got 10 to 15 mins in and just went off, changed the board power supply chip and its ok now

    Dave

Viewing 8 posts - 1 through 8 (of 8 total)
  • You must be logged in to reply to this topic.