- This topic has 6 replies, 3 voices, and was last updated 5 years, 6 months ago by
.
-
Posts
-
Managed to blow the module on this whilst changing the brushes. Thought i had turned it off but plug behind cabinet and still on !!
Anyway, owned up and order replacement but machine is still dead. Looks to be the right programmed board according to connections but see there are several listed. Am i likely to be missing something or would the wrong module be the cause. board fitted was hvr49027992that module is for a machine with a serial number starting from 1231
if its before its a different boardDave
3100439913080590 machine is dead, no display. Would the wrong module still at least light up display ?
snig wrote:3100439913080590 machine is dead, no display. Would the wrong module still at least light up display ?
dont know if wrong board will cause problems but from that number you have correct board
assume you have checked power to the machine
was the board sealed, have had used faulty board from connectthe programme selector switches live on and off, is it working
my next action would be to check the power supply on the new board to see if its working
not sure if front panel has chips on it but if it has you may have blown that too
Dave
i have power at the main module and pretty sure it was sealed when it arrived. Looks like i’ve possibly damaged the display as well then !!!
Costly mistake
- You must be logged in to reply to this topic.