Hygena Select Intergrated Dishwasher Not Filling

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Hygena Select Intergrated Dishwasher Not Filling

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 31, 2005 at 11:09 pm #9890
    admin
    Keymaster

    Hello, Can anyone tell me why my dishwasher has stopped fillling? It makes all the normal sounds as though the water is entering, but when you open it there is no water in it. All that happens is that the element gets hot and that is it. When I put the water in manually, i.e when I use a glass and just pour it in, put it on the rinse cycle it goes through the normal process. That is to rinse and then empty the water then dry. This leads me to think that there is just a filling problem. Can anyone help?

    Covert

    May 31, 2005 at 11:12 pm #136613
    Dave_Conway
    Participant

    Re: Hygena Select Intergrated Dishwasher Not Filling

    Model number please 😀

    APL??? AHY??? APM ???

    It should be around the door somewhere, normally on the right hand side 😉

    Dave.

    June 1, 2005 at 7:12 am #136614
    admin
    Keymaster

    Re: Hygena Select Intergrated Dishwasher Not Filling

    Model Number is: APL 8223/1 Type: 8P2. 2144211. Hope this helps. Thanks for your quick response.

    June 1, 2005 at 7:52 am #136615
    kwatt
    Keymaster

    Hi,

    It’s got a filler matrix system on it that one so it could be a number of things, but I would be llooking towards the fill matrix and level switch as well as the inlet valve for signs of failure.

    In all honesty though I suspect that you may need an engineer to have a look as these are not the easiest to work on. 😕

    K.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.