Indesit XWC61452 Washing machine Error code?

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › Indesit XWC61452 Washing machine Error code?

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • February 9, 2021 at 11:28 am #99106
    lkomnino
    Participant

    Not sure how to read code, cleaned out trap to find toothpick! powered off for 5 min, then on …..5 min later all lights flash and this: [video=youtube_share;TpOkJEUHAz8]https://youtu.be/TpOkJEUHAz8[/video]

    February 9, 2021 at 8:00 pm #475008
    electrofix
    Moderator

    well i may be wrong but i think that is fault F12

    communication problem between the 2 pcbs main board and the display board

    Dave

    February 9, 2021 at 8:48 pm #475009
    lkomnino
    Participant

    Might be the usuall IC, inductor and resistor trio that like to fizzle out on a lot of boards. Cue entensive multimeter testing….

    February 9, 2021 at 11:37 pm #475010
    murv
    Participant

    I’m pretty sure this is an F3 on Innex machines (Temperature sensor error).

    Murv…

    February 9, 2021 at 11:55 pm #475011
    electrofix
    Moderator

    from what i can see F3 should be lights 1 & 2

    from video its lights 3 & 4 which i still think may be F12 but cant hurt to check

    Dave

    February 10, 2021 at 10:17 am #475012
    lkomnino
    Participant

    Well had a quick butchers at the PCB, to see if there was anything obvious. Nothing. reconnected the cable to the board and powered it on…..
    Decided to work like nothing happened?!?
    Maybe it will thow another code but hoping it was just dirty connections.

    February 10, 2021 at 10:58 am #475013
    murv
    Participant

    As far as I was aware the least significant binary digit is on the right of the 4 status leds giving error 1+2.

    Murv…

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.