Indesit XWC61452 Washing machine Error code?

[lkomnino]

Not sure how to read code, cleaned out trap to find toothpick! powered off for 5 min, then on …..5 min later all lights flash and this: [video=youtube_share;TpOkJEUHAz8]https://youtu.be/TpOkJEUHAz8[/video]

[electrofix]

well i may be wrong but i think that is fault F12

communication problem between the 2 pcbs main board and the display board

Dave

[lkomnino]

Might be the usuall IC, inductor and resistor trio that like to fizzle out on a lot of boards. Cue entensive multimeter testing….

[murv]

I’m pretty sure this is an F3 on Innex machines (Temperature sensor error).

Murv…

[electrofix]

from what i can see F3 should be lights 1 & 2

from video its lights 3 & 4 which i still think may be F12 but cant hurt to check

Dave

[lkomnino]

Well had a quick butchers at the PCB, to see if there was anything obvious. Nothing. reconnected the cable to the board and powered it on…..
Decided to work like nothing happened?!?
Maybe it will thow another code but hoping it was just dirty connections.

[murv]

As far as I was aware the least significant binary digit is on the right of the 4 status leds giving error 1+2.

Murv…

[Author]

Posts