- This topic has 13 replies, 2 voices, and was last updated 5 years, 1 month ago by
.
-
Posts
-
putting this number into Qualtex brought up 082077803
which is the door slider. if this is correct then these are not a 1 piece hinge. there is a bar and a pin plus the slider. All held in place by a horizontal spring inside the case
have you got the proper model. With the age of this am expecting a number beginning 0505 but could be wrong
Dave
electrofix wrote:putting this number into Qualtex brought up 082077803
which is the door slider. if this is correct then these are not a 1 piece hinge. there is a bar and a pin plus the slider. All held in place by a horizontal spring inside the case
have you got the proper model. With the age of this am expecting a number beginning 0505 but could be wrong
Dave
Sorry, 059042373 S.No: 000139
electrofix wrote:yes is the slider one
have you looked at it ? whats wrong with it ?
Dave
Hi Dave,
Customer sent this. Thought I would check if the hinge is available first.
Keith.
all you should need is new sliders
poss part no above
that bar coming out of the case is connected to a spring to pull the door in. the slider sticks out the bottom of the door.and stops metal to metal contact
Dave
electrofix wrote:all you should need is new sliders
poss part no above
that bar coming out of the case is connected to a spring to pull the door in. the slider sticks out the bottom of the door.and stops metal to metal contact
Dave
The pin going through the bar is sitting at about a 45 degree angle to the bar. I have a video but couldn’t upload it. Should this pin be fixed or will the slider hold it in position?
if you look at the pics of the slider its split. the bar goes in the split ( middle) and the pin goes through the lot making a hinge
when you see it you will realise its a very simple system
whats happened is the slider has fallen to bits. other bits may be worn but you will need sliders all the rest is metal
Dave
electrofix wrote:if you look at the pics of the slider its split. the bar goes in the split ( middle) and the pin goes through the lot making a hinge
when you see it you will realise its a very simple system
whats happened is the slider has fallen to bits. other bits may be worn but you will need sliders all the rest is metal
Dave
Cheers Dave, I’ll book it in and take a look.
electrofix wrote:if you look at the pics of the slider its split. the bar goes in the split ( middle) and the pin goes through the lot making a hinge
when you see it you will realise its a very simple system
whats happened is the slider has fallen to bits. other bits may be worn but you will need sliders all the rest is metal
DaveHaving looked at the appliance the sliders and bar are different from the one relating to the above part number.
I have attached a photo of the original one.[IMG2=JSON]{“data-align”:”none”,”data-size”:”full”,”height”:”376″,”width”:”794″,”src”:”https://www.ukwhitegoods.co.uk/forums/filedata/fetch?filedataid=5734&type=thumb&attachmentnodeid=”}[/IMG2]
yes thanks
cant find anything on this probably because its old
to compound as far as i know the parts website for these has been down for months
i would try ringing stoves and see if they can email you parts listings/ breakdowns
Dave
- You must be logged in to reply to this topic.