Candy front felt seal mod no GVC D91CBB

Home › Forums › Trade Technical & Spare Parts Forums › Trade Spare Parts › Candy front felt seal mod no GVC D91CBB

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • March 15, 2021 at 4:15 pm #99290
    delta01
    Participant

    hi i ordered a seal to fit this model the original one was just felt, the seal that has come is not felt and has a sticky backing, has it been changed or have they sent the wrong seal the part no on the new one is 49116619 thanks john

    March 15, 2021 at 7:17 pm #475764
    kaibart
    Moderator

    This is the correct part as it has always had a sticky back since I can remember

    March 16, 2021 at 10:48 am #475765
    delta01
    Participant

    thanks i was just unsure about the change from felt to plastic expanded foam

    April 2, 2021 at 7:33 am #475766
    delta01
    Participant

    hi i finally fitted this seal i cleaned the old adhesive off first , about a week later the customer rang to say it had partly come off again , after i fitted it originally the drum was very stiff to rotate should the seal be lubricated with ptfe ? thanks john

    April 2, 2021 at 4:32 pm #475767
    kaibart
    Moderator

    If the seal was that tight I would have contacted whoever you bought it from as they have modified it due to steam escaping and causing problems with the modules

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.