Zanussi Washing Machine – replaced pump but still get E20 and doesn’t drain properly

electrofix wrote:if you fill it with water and then select drain how long does it take to drain it ?

Dave

Thanks for the reply Dave – if i just switch it to the drain programme it doesn’t finish draining – it starts and does about half and then freezes but doesn’t give an error code. I can get it to empty by repeatedly restarting the drain programme. If I try a normal programme it seems to work fine but then can’t spin because of the water so then gives an E20 error code

electrofix wrote:fill with water does it

A drain quickly so you can see the water going down and then reports E20

B drains very slowly and reports E20 after which there is still water in the drum

Dave

B – very slow

electrofix wrote:in that case you have a blockage you just have to find it

i would take the sump hose off the drum first

I assume you have tried taking the outlet hose off the sink or where ever its connected and tried draining into a bucket. Just to eliminate blocked sinks etc

Dave

OK thanks, yep i’ve got the outlet hose draining in to a bucket – i’m not sure where the sump hose is but I’ll google it 🙂
Thanks for your help