Zanussi ZWF91483WH (914910401 02) Washing Machine Diagnostics…

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Zanussi ZWF91483WH (914910401 02) Washing Machine Diagnostics…

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • June 3, 2021 at 4:58 pm #99624
    jontymox
    Participant

    Good afternoon all,

    The above w/m is aborting wash cycles as follows: Quick Wash (30 Minute) – Press Start, Door Locks, Starts to Fill for a few seconds, then 1 Minute Remaining is Displayed, Door Unlocks, and 0 Displayed.

    When I tried a drain/spin cycle, start/pause led flashes, but will not remain lit, and door doesn’t lock.

    Not sure where to look, or if to suspect main board, and wonder if a Diagnostic Test would help?


    jonty

    June 3, 2021 at 6:02 pm #477120
    electrofix
    Moderator

    have you checked the heater ?

    have sent you service info

    Dave

    June 3, 2021 at 7:12 pm #477121
    jontymox
    Participant

    Thanks Dave,

    Will revisit in the next couple of days, and let you know outcome.


    Best wishes,

    jonty

    June 4, 2021 at 2:24 pm #477122
    jontymox
    Participant

    Good afternoon all,

    Well Dave, you’re right again!

    The element was causing the problem/s, and I’ve replaced it.

    It was severely corroded/damaged, and I wonder why it didn’t trip?


    Thanks again,

    jonty

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.