Beko dishwasher DIN15211 — goes dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko dishwasher DIN15211 — goes dead

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 16, 2021 at 5:21 pm #99805
    asp11
    Participant

    This machine empties fine to start but then goes totally silent, doesn’t fill, click or make any other sounds…… press cancel, it’ll pump out ok

    CX says either F1 or F2 shows up but neither did for me while on visit……. I’ve read some posts that say “fill valve faulty” but as the machine goes silent after pumping out, my thoughts were towards the pcb — ANY ideas please?

    Prod : 7653953842

    July 16, 2021 at 7:09 pm #477987
    electrofix
    Moderator

    fault codes

    did you check the valve coil ?
    or for broken wires ?

    Dave

    July 19, 2021 at 8:17 pm #477988
    Hollytree_Technical
    Participant

    With all the Beko dishwashers you need to check for broken wires in the door loom – I did a similar machine today with the same fault symptoms that turned out to be broken wires in the door hinge.

    Jem

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.