- This topic has 3 replies, 2 voices, and was last updated 4 years, 8 months ago by
.
-
Posts
-
Hi. I have a Zanussi ZWF 1621W washing machine. It stopped working yesterday. The drum was not turning. I disconnected it and took the back off to check the band. The motor, band and drum was turning on spin program. I put it all back, reconnected the cold water and tried it again. The drum did not spin. Took it out again and took the back off. This time the motor did not spin. Found out how to get the error codes on the non digital display. I get two flashes on the Start and End LEDs and then 6 flashes on the End LED. Can anyone tell me what this indicates. Thank you.
not sure if you have read the fault codes correctly
fault 26 does not exist and 62 is an overheat
suggest you check carbon brushes on the motor as your saying the drum is not turning on a programme
Dave
Thank you for your reply. I checked the flashing sequence several times and I’m sure I described them as they were. The motor was turning the drum yesterday after I got it out from under the worktop and took the back off to check the band. Could the brushes causes an intermitant fault? As the bearings sound a bit rough too on the drum, maybe it’s time for a new machine.
- You must be logged in to reply to this topic.