Dwf 30p

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Dwf 30p

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • July 27, 2021 at 1:58 pm #99855
    clockworkone
    Participant

    Hotpoint/Bosch Dwf30p/17. No display illuminated. Nothing happens. On/off switch possibly faulty. 6 tag switch
    . Looking from left to right tags 1 and 2 open and close with on/off button,3 and 4 the same. But 5 and 6 do not. Door latch in closed position when tested.

    July 27, 2021 at 4:56 pm #478174
    iadom
    Moderator

    Think I may still have the manual for that. PM me an email address and I will send it to you if I can find it.

    Jim

    July 27, 2021 at 5:29 pm #478175
    electrofix
    Moderator

    have you got the Fd number drom the label ?

    Dave

    July 27, 2021 at 5:41 pm #478176
    iadom
    Moderator

    I have a feeling this has momentary switches that only make for a split second as the button is first pushed. Have found the full pdf manual.:cool:

    July 27, 2021 at 5:46 pm #478177
    electrofix
    Moderator

    iadom wrote:I have a feeling this has momentary switches that only make for a split second as the button is first pushed. Have found the full pdf manual.:cool:

    was also thinking some of these were on a recall due to relay problems blowing up the board

    https://www.hotpointservice.co.uk/safety-notice-dishwasher

    Dave

    July 27, 2021 at 5:56 pm #478178
    iadom
    Moderator

    The manual is dated 2001 so getting on a bit.

    July 27, 2021 at 9:17 pm #478179
    clockworkone
    Participant

    Many thanks for replies. Email is..appliancerepairs1@eircom.net

    July 28, 2021 at 8:06 am #478180
    iadom
    Moderator

    clockworkone wrote:Many thanks for replies. Email is..appliancerepairs1@eircom.net

    Can you check that email address, bouncing back as invalid.

    Sorted, I just clicked on your link but you didn’t leave a space between is.. and your email address so removed that and you should now have the manual.

    Jim

    July 28, 2021 at 9:23 am #478181
    clockworkone
    Participant

    Many thanks for that Jim. Appreciate all your effort.

  • Author
    Posts
Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.