Beko dryer model dtgc8000w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko dryer model dtgc8000w

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • August 11, 2021 at 7:38 am #99920
    scots
    Participant

    Anyone know what may be wrong here.
    Dryer not heating, checked the element ok, TOC Ok.
    The heater NTC is part of the heater assy so cant replace as NTC alone.
    I see there is another NTC after looking at parts list, wonder where it is?
    So looking at either NTC’s or board?
    Any help appreciated

    Brian

    August 11, 2021 at 8:53 am #478474
    electrofix
    Moderator

    have emailed you the service manual

    Dave

    August 11, 2021 at 1:58 pm #478475
    ray.t
    Participant

    I’ve had a few of these now that the wire snaps off inside the heater. I think it was the thick black wire that had come away.

    August 11, 2021 at 3:52 pm #478476
    scots
    Participant

    Thanks again Dave for the info.. Suspect the board tho..
    Hi Ray heater tested ok.. I tested it from the plug on the top. thanks for help

    I did run it on a timed program so I can only assume the dryer NTC ok?

    Brian

    August 11, 2021 at 5:12 pm #478477
    ray.t
    Participant

    If you have no joy with anything else I would double check the heater. The first time this happened to me I arrived at the job (no heat) and the machine worked fine. I left and told the customer to call if it happened again.
    A day or two later I had the call to go back and this time no heat. They seem to go at the point that the wire attaches to the heater.

    August 12, 2021 at 6:54 am #478478
    scots
    Participant

    Thanks Ray,

    Brian

  • Author
    Posts
Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.