Avoid Common Spare Part Mistakes
Every day we deal with spare parts, all day long, that’s what we do.
We know how complex it is and how frustrating it can be to find parts or more accurately, to find the correct parts and there are times when even we struggle to identify parts. Of course we always manage it where we have the information to do so but at times, it ain’t easy.
And, every day we see people that get it wrong and order an unsuitable replacement part. Because it is so easy to go wrong if you are not familair with the industry and how it works.
Here we try to put the spotlight on the most common things that people get wrong.
And, it’s not just from us! We will often have people on looking for parts that people have bought from other suppliers and were wrong, all too often for the reasons below.
Hopefully you may better appreciate why we encourage people to ask us about parts as, we want to make sure you get the correct part first time.
Ensure you get the correct part ordering from us by having a quick read at this important information
If you are even a tiny little bit unsure, you can often save yourself a heap of trouble and possibly money by just asking us before you order. We will confirm suitability or help and guide you to find out for sure you are ordering the correct part for any appliance you have.
We appreciate that people want answers right now and expect things to be easy but, sadly that’s not how our world works and that time spent up front is all too likely going to save you grief later.
Ordering From Images
For us this is a very dangerous thing to do.
We will often say to people that one hinge looks like another, looks like another etc but, they will almost inevitably not be interchangeable.
The same applies to almost all spare parts, heating elements, seals, switches, thermostats and a host of other parts, they all look very alike and yet are totally different and can’t be swapped about.
In short when people do this it is often the case that it will be the wrong part that gets ordered, it won’t fit.
Trying To Order By Size
There are some parts that you can use sizes for but it truly is, hardly any.
Almost all are shaped and moulded to fit one particular model from scores of them or, a range.
As above, they will often look very alike but, they won’t all fit.
For most things, do not rely on sizes and when they are given they are for confirmation only.
Universal Spare Parts
Compatible universals spare parts that are usually cheap are a little different as they are designed to fit a plethora of different machines so look, size can be of use but not in every case.
What We See Looking Up Parts
These are examples of what we see when we are looking up parts.
Liebherr
Above shows Liebherr’s Liparts system and all the info we get to look up parts.
As you can see, we have a part number, the quantity used, a very basic description with zero size information, a price code and a blowout diagram.
That’s all we get. Let’s look at another.
Electrolux
So here’s Electrolux’s Procorner system used for parts lookup and you can see that it is almost identical to the Liebherr system in terms of layout and the information that is available.
Beko
Once more, pretty much the same thing if cosmetically different.
Smeg
And again, same thing only different.
How To Correctly Find Parts
There is only one way really, the way we always use that gets it 100% correct by following this simple path:
Make or brand > Model number > Serial number or production code > Part required = Part number
It is vital in almost all cases to get to that part number, if you don’t then there is a very high probability that any part you order up will be wrong.
To get to the part number, you will need the rest of the information.
Sadly in a lot of cases there is no shortcut or way around this as there are scores of brands selling hundreds of models every year meaning that over the past few years there are thousands and thousands of machine models out there. Many will have completely different and non-interchangeable parts in them.
I a looking for Parts as Follows for AEG Micromat 143 E/U.Model E-NR 947 602 433 Serial number 31501405.
Parts required Turntable Support ,& Glass Turntable or a Conversion Kit .
Hi Andrew,
I am afraid that is obsolete now with no alternatives 🙁
Please help
Found what i think is the correct part and need your expertise on whether or not my model number is correct.
This is your part link: https://shop.ukwhitegoods.co.uk/481221848186-fridge-freezer-control-pcb
My fridge is showing 8586 151 15001
Its a whirlpool side by side door fridge freezer with ice held in the door and the 2 screws under the drip tray
Thank you for any help
Hi Sacha,
Yes that is the correct front control board on that model.
E-Nr.
SGS3042GB/01
FD 7811 003373
Type S10R51B
4242002164304
Above is on the serial plate on a freestanding Bosch dishwasher. Do you have a replacement control panel module as only the 65 deg wash is working.
The Time Delay/H Wash – Rinse- Dry- indicator light panel is damaged and U/S.
The other buttons are:
Saucepans 70 deg
Intensive 65 deg
Normal 65 deg
Eco 55 Deg
Glasses 40 deg
Quick
there are also Rinse aid and salt indicator lights.
AEG Cooker Hood:
MOD.CH 700X/GB
E-Nr: 942 120 813
F-Nr: 530 00045
Motor: 170 W
Push button assembly consisted of: light, 1, 2 and 3 speed control buttons.
The push buttons are mounted on a PCB and are constructed with flimsey plastic clips which have broken causing the switch to mal-function. I need a replacement PCB assembly to which I can solder the existing wiring.
Some suppliers (e.g. Electrolux) say that I have to replace the PCB, wiring and associated parts on the motor costing £130+ which I find extortionate – can you do better?
I am an qualified engineer well capable of disassembling, soldering and reassembling provided I have the right parts.
Many thanks.
Martin
Hi Martin,
That\’s an old Elica produced hood last made in 2003 and Lux are the only show in town on the part you need so, no it cannot be gotten any cheaper than that I am afraid.
It is also the only way you can buy that part.
fridge model KSBSDIX16 – kenwood
I am in need of relay which reads (sticker on pcb housing) as below;
Donper MZ-297
11509000601
MU-120-05RCN
DJZ-C02-ZD-F[
6613
1.6a input
1.5a output
Please review and advise.
Thank you
LOOKING FOR FOUR WHITE CLIPS WHICH HOLD THE GLASS BOWL ONTO THE DOOR OF THE MACHINE
Hi Charles,
That will be these clamps:
[url]https://shop.ukwhitegoods.co.uk/169042-hotpoint-creda-washing-machine-door-glass-retainer[/url]
I have a creda concept smart cook model No C561EG , serial No 86 1 00055. I am unable to regulate the heat of one of the ceramic hobs element. Please could you advise, by letting me know the part no I require so I can place an order. Regards john. mobile 07748952216
It should be one of these regulators that you need:
[url]http://shop.ukwhitegoods.co.uk/c00240957-cooker-energy-regulator[/url]
i have an Indesit ID60G2(A) and desperately need new glass for the door as cheap as possible as i am in desperate need to use my cooker with having 5 children, any help is much appreciated thank you
Hi
I am looking for metal grease filters for a Smeg k2 cooker hood. They have been discontinued by Smeg. Just wondering if an after marker product is available. It takes 3 filters 380mm x 320mm. Cheers Steve
I am looking for a new Lec fridge door handle.
The model of my fridge is TL6015W
The number of the door handle part is 444441263.
Would you have one of these?
Regards
Jenny Boyle
Hello
i have Samsung fridge compressor MSE4AOQ-L1G AK1 without any electrics, what kind of parts i need to run this compressor? what part numbers i need look for, overload protector, relay capacitor?
Regards
I need a replacement control fascia panel for the following:-
Cooker: Diplomat 1100DFa RANGE
Model No: 050564164
Serial No: 20415496
Can you help, please?
Hopefully,
Derek Caton
Hi ,
Looking for a dual circuit grill energy regulator for an old Jackson Hallmark 29502 , Diamond H part 23ER3TF green .
Thanks .
I need to source a replacement outer door frame for Indesit Model No WDS 1000
Hello,
I have a cooker hood, BRANDT Model#AC490X, i want to buy the charcoal filter, and the grease filters.
Do you have the PN# to buy?