Fagor Innovation Series Washing Machine Error Codes

Spare Parts Experts

Fix your appliance today. Get the right part.

Our team of experts has vast knowledge of the industry. We’ll help you find any part you need and get it to you fast and cheaply from thousands in stock.

  • Thousands in Stock
  • Expert Support
  • Fast Shipping

Fagor washing machine fault codes and spare partsThese fault codes are for Fagor washing machine models that use a digital display using what Fagor term the V3, V4 and V5 electronic controls so, these erorr codes cover a number of Fagor produced washing machines.

Before you start any investigation of the fault or even remove the lid of the washing machine or washer dryer please read and fully understand this article in full and pay particular attention to the safety and information notices at the bottom of this page as they contain extremely important information!

Please remember to support our site by buying Fagor washing machine spares from our store here and, if you decide that you really need an engineer please support the local repairers that help make this site possible, you can search for a Fagor washing machine repairer using the engineer search.

Fagor spare parts and support may be limited since the group collapsed in 2013.

  Fagor Washing Machine Fault Codes

These fault codes are written for washing machine repairers and not for the general public by Fagor and they assume a certain level of competence on the part of the user in diagnostic routines. We have added some notes to try to assist you in determining the nature of the fault you have but, you will still need to investigate each failure on its own merits. For more help and advice on fault finding on a washing machine please refer to our washing machine fault finding guide from this link before you begin.

If you struggle or cannot find the appropriate fault code that you need for your Fagor machine please ask in the forums and the gusy there will do what they can to help and locate the meaning of the fault code you need

Please check that any Fagor washing machine spares recommended are suitable for use on your particular model and serial number. If you are unsure about the suitability of any spare part please ask to ensure that you get the correct spares for your washing machine or washer dryer. Please, don’t guess or assume as spares can be altered on a production run with the same model number having several different alternative components used.

 

F01

Not filled in time allowed (8 Minutes) – washing machine does not fill
  • Check mains water pressure
  • Check inlet hoses for kinks
  • Check inlet filter
  • Check water inlet valve
  • Pressure switch fault
  • Wiring fault

 

F02

Not drained in time allowed (6 minutes) – washing machine fails to drain water
  • Check that filter is not blocked or obstructed
  • Check drain hose is clear of any blockage or obstruction
  • Check wiring to drain pump
  • Check drain pump is not defective
  • Check level sensor or switch
  • Check wiring to level sensor

 

F04

Door safety lock error
  • Check door is closed and latched correctly
  • Check wiring
  • Check door lock

 

F05

NTC fault – temperature sensor detected as either open circuit or shorted
  • Check wiring to temperature sensor
  • Check thermistor

 

F06

Water heating error detected – Failed to heat for 15 minutes
  • Check wiring to wash heater and thermostats
  • Check wash heater for continuity
  • Check NTC (temperature sensor) probe

 

 

F07

Overfill or drain pump not in circuit
  • Check for overfoaming evidence – can trip pressure switch
  • Check wiring to level sensor
  • Check pressure switch is not defective
  • Water inlet valve locked open
  • Check drain pump for continuity

 

F08

Motor fault detected – tacho generator error
  • Check motor tacho connections
  • Check tacho position
  • Check motor connector block
  • Check wiring
  • Check motor carbon brushes if fitted
  • Check motor

 

F09

Motor detected as not reversing
  • Check motor connector block
  • Check wiring
  • Check motor carbon brushes
  • Check tacho connections
  • Check motor

 

F10

Communication error between electronic control boards and wiring
  • Check wiring and harness between control boards
  • Check electronic control modules

 

F11

Communication error between boards and wiring
  • Check wiring and harness between control boards
  • Check electronic control modules

 

F12

Communication error between electronic control boards and wiring
  • Check wiring and harness between control boards
  • Check electronic control modules

 

F13

Flow meter fault – not detected
  • Check wiring to flow meter
  • Check flow meter
  • Check electronic control modules

 

F14

Pressure sensor fault – not detected
  • Check wiring to pressure switch or level sensor
  • Check level sensor
  • Check electronic control modules

 

C03

Out of balance protection activated
  • Note small loads or large laods that cannot be sorted may not spin
  • Sort laundry load and retry to spin

  Fagor Washing Machine Spares

Fagor Group appliances are found using two key pieces of information, what the washing machine model number is and the serial number from the rating plate. We can often find them from the model number because we can eliminate multiple instances on occasion and, we know what we’re looking at and for, you often won’t. But, even with our knowledge even we will often need the serial number or production code to identify the washing machine correctly and, accordingly, the spares required.

Our advice is very simple, don’t guess at it and end up with the wrong parts, contact us from this link and check that you are ordering the correct Fagor spares.

  More Fagor Washing Machine Help, Advice And Guidance

Should you need more help and guidance please use the links from this article as most of them will help you to understand your Fagor washing machine a lot better and probably very much help you in diagnosing the fault you have. Of course there are many other articles on the site that will also help you do this.

In addition you can post in our washing machine forum after registering but please do pay heed to the information below before doing so and read the guides, they are there to help you.

You must understand certain things before you begin or attempt any repairs on your own and we want to make these points very, very clear to anyone that decides to investigate one of these or any other washing machines:

      • We are not responsible for your safety, you are and by using this guide you accept that and accept that any damage that you may cause and work undertaken is entirely at your own risk.
      • We will advise the common causes of the fault codes but we cannot guarantee that any parts or work recommended will resolve the issue. It is entirely your responsibility to diagnose your particular problem and resolve it.
      • We are not responsible for you buying spares that do not resolve the problem, this is down to your own diagnosis not ours.
      • No warranty is inferred, implied or given.

You also have to understand that fault or error codes are not a “magic bullet”, they will not tell you what the problem is, they will only offer you an indication of where the problem lies and they are no substitute for good old fashioned diagnostic skills. You can find out more about what fault codes actually tell you in this article. So please be well aware that, even with this new found knowledge you will still have to actually be capable of investigating and diagnosing the problem and this means adhering to basic appliance safety for working on them.

Please do note that manufacturers can and do change fault codes without notice and we cannot guarantee that these error codes will apply to your particular model as all codes apply to a wide range of appliances and not normally any one specific model. To determine if these fault codes do apply to your particular Fagor washing machine or washer dryer model please post a request to confirm this in the forums.

4 thoughts on “Fagor Innovation Series Washing Machine Error Codes

  1. Keep filing up . It. Is ok when power is on but when I select A program to fill it carriers on filling. If I switch power on of it stops

  2. Our Fagor innovation works fine, but has stopped taking fabric conditioner. You have to tip the tray when it is rinsing and that is the only way to get it into the machine. Can you please advise anything. Many thanks.

  3. I put number 2 on the machine setting
    That means it will wash 30mins but it keeps on stopping with a sign F 02. What this means?

Leave a Reply to Sue Begg Cancel reply

Your email address will not be published. Required fields are marked *