- This topic has 4 replies, 2 voices, and was last updated 16 years, 1 month ago by
.
-
Posts
-
Hi, My Ariston AWD12 has stoped again and the dial is clicking round as usual with a 10 flash fault. Can anyone help. Thanks in advance. Chris
not sensing pressure switch
could be pressure switch, more likely pcb at that age
good luck, the pcbs are a lot of money
Re: 10 flash fault
Hi, I replaced the pcb 7 months ago so I hope its not that again. I’ll have a look at the pressure switch tomorrow (Sun) and let you know how I get on, Thanks for info, Regards Chris
Re: 10 flash fault
Hi again, took the pressure switch off blew into it and could here the switch clicking, the pipe to it is clear. Put it all back and switched on the pump runs, dials clicking round and still the code 10 fault, would it be worth buying a pressure switch to see if that cures it. Thanks Chris
- You must be logged in to reply to this topic.