- This topic has 1 reply, 2 voices, and was last updated 17 years, 5 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
customer says it sticks at various points on prog, i checked usual possible causes ie. not empyting / filling properly carbons etc, i could not get it to fault, but stongly suspect timer, its really a zanusie of course any one had similar fault ?
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.