30mm or 35mm bearing kit for Hotpoint WMAOD944** S/N 561731026684

[ZX10dale]

Hi folks,
I am totally out of ideas to establish what the correct bearing kit is for the above referenced Hotpoint Washing M/C ???
All the searching I have done (mostly via Ebay) does not match the above machine to a bearing set of either 30 mm or 35mm (lots of WMA machine types listed to both types of bearing sets however non specific to the above referenced machine part number)…………….is this a sealed drum type that cannot be repaired ??? Any help much appreciated.

[electrofix]

firs take the lid odd and look at the drum. it splits in the middle and if its not a welded unit it will have a ring of torx 30 bolts

if yes then you need to strip it, 2 reasons

1 to find out which bearing kit is needed
2 to inspect the drum spider for corrosion

Dave

[andyjawa]

It is a sealed tank. Part number C00285584 listed on Hotpoints UK spares site @ £212.99. You now know what you must do!

[Author]

Posts