ADL348

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ADL348

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • May 5, 2009 at 3:54 pm #45477
    machineman
    Participant

    CIRC pump seems to be running slowly put new motor on still the same .does this have a changeover switch on the mod so it switches to full flow
    Dave

    May 5, 2009 at 4:41 pm #285786
    bzz67
    Participant

    Re: ADL348

    read a service bulletin once that said sometimes the bent sump hose twists or collapses in operation reducing presure. never seen it myself but maybe worth a look.

    May 5, 2009 at 5:12 pm #285787
    machineman
    Participant

    its not the sump hose you can see that as its washing i am pretty sure that the m/c starts at a reduced speed then picks up ,but what kicks it over to high speed ?
    Dave

    May 6, 2009 at 8:09 am #285788
    bzz67
    Participant

    Re: ADL348

    as far i am aware its a single speed motor, the old askol type motors certainly play up but if you have changed it for the new type with capacitor, it should be fine. is there 240v. get me a service number and i will have a bit more of a look.

    May 6, 2009 at 8:21 am #285789
    machineman
    Participant

    851134815819

    May 6, 2009 at 9:20 am #285790
    bzz67
    Participant

    Re: ADL348

    cant see anything about more than one speed, only reference is

    Spray pump motor . . . . . . . . . . . . . . .. . . . . . .2800 RPM

    sorry cant be more help.

    May 6, 2009 at 12:21 pm #285791
    machineman
    Participant

    thanks for looking i will check she has full voltage going to motor
    Dave

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.