- This topic has 1 reply, 2 voices, and was last updated 12 years, 5 months ago by
.
-
Posts
-
Hi,
Hopefully someone can help me before I take a sledge hammer to my dishwasher! The situation is as follows: MY ADP 8322 passes the test cycle most of the time, however on any of the wash selections it only makes it as far as the rinse cycle before cancelling the wash and flashing and bleeping (F8). There is a popping noise coming from the circulation pump and a clicking noise from the PCB prior to it shutting down.
I have replaced both the circulation pump and the pressure switch and i am now scratching my head. I really dont want to spend any more money on the bloody thing!
Please help,
Regards, Mike
Re: ADP 8322 Hell
F8 is a water level fault.
Can be caused by any number of things but the metering tank is a possibility, have you checked that?
If I recall, they also have a flow meter built in as well but that usually causes an F6 error, failure to fill.
It is a puzzler though if you’ve changed the pressure switch.
K.
- You must be logged in to reply to this topic.