AEG

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 3, 2008 at 1:54 pm #37850
    mjhservices
    Participant

    AEG Lavamat 88730-w 914 002 098 02
    Push on/off button and C7 displays after 2 seconds and the Wash, Prewash and Rince lights flash and the machine does nothing.
    Help needed
    Thanks Mark

    July 3, 2008 at 3:51 pm #256769
    Penguin45
    Participant

    Re: AEG

    Heater circuit – element, relay, ntc, p/sw all possible failures.

    Chris.

    July 3, 2008 at 6:01 pm #256770
    mjhservices
    Participant

    Re: AEG

    Thanks Chris. Checked most of them already except relay. Also how do you check the NTC?
    Mark

    July 3, 2008 at 9:23 pm #256771
    leavemetogetonwithit
    Participant

    Re: AEG

    mjhservices wrote:how do you check the NTC?
    Mark

    Connect meter across it and see if it changes resistance (downwards) as you warm it.
    Mike.

    July 3, 2008 at 11:34 pm #256772
    Penguin45
    Participant

    Re: AEG

    In Kohms.

    Chris.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.