- This topic has 2 replies, 3 voices, and was last updated 13 years, 4 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
Good evening,
Has anyone any information on the above dishwasher?
Upon testing the m/c today, the unit was in “safety/drain” mode, accompanied by 3 flashes from the control panel.
Drained/dried out base, and re-tested.
Above condition remained, together with 2 flashes indicating drain problem.
Unable to find any blockage in system; pump,drain hose, or plumbing.
Dishwasher remains in this mode, despite re-setting electronics.
Any help/thoughts welcomed.
Regards,
jonty
Re: AEG 40640 Dishwasher PNC: 91123260101 "Flashing Error Co
If the pressure switch is stuck then until it is sorted it won’t reset and the error will continue to flash I reckon.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.