- This topic has 2 replies, 3 voices, and was last updated 12 years, 4 months ago by
.
-
Posts
-
Not heat reported.
After checking it all through and running it on a quick wash I established it was washing, heating & draining ok.They have since phoned to say that it is going through the cycle but it there is no heat at the end, things clean but cold / wet.
They have tried it on 3 different programmes, this was to my request, but still no dry. ‘If anything the quick wash seems to be warmer at the end than the other cycles’.
Now before I jump in and replace the control module (in the base not part of the selector board as normal) I was hoping someone may be able to tell me different? Ta.
Re: AEG 86070 VI 911937608
does this have the long thin green hose that goes from the RHS up and over the body ? if so, check the T-junction where it joins in the rest of the water circuit, for grease build up.
Wrote one of those off after spending lots on pcb repairs and heaters and ntcs only to find that out when stripping all the good parts down and off of it. kicked myself hard…
- You must be logged in to reply to this topic.