AEG A3193-6GA (928341122) Fitting evap thermistor

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG A3193-6GA (928341122) Fitting evap thermistor

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 6, 2008 at 10:28 am #37910
    bubs
    Participant

    Hi Folks,
    I know this is not a “how to get it apart” forum but…

    Have a AEG tall freezer A3193-6GA (928341122), ordered an evap thermistor, think it comes as two sensors on one lead. Any tips on getting into the evap without breaking it. Have a manual but its only fault codes.
    Cheers
    Graeme

    July 8, 2008 at 7:04 pm #257066
    pen0668
    Participant

    Re: AEG A3193-6GA (928341122) Fitting evap thermistor

    is this the one with the evap in top if so some cable to tie evap up when working on it

    July 8, 2008 at 9:24 pm #257067
    bubs
    Participant

    Re: AEG A3193-6GA (928341122) Fitting evap thermistor

    Thanks, done yesterday. Found it difficult to split the lower tray to feed in the front sensor. One of those take your time jobs.
    Thanks
    Graeme

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.