aeg f/f

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg f/f

  • This topic has 2 replies, 2 voices, and was last updated 17 years ago by adv.
Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 31, 2009 at 12:47 pm #44659
    adv
    Participant

    aeg santo 75348 enr 928 405 224 frost free plug in lights on panelin on front come on for bowt 10 secs then go off no noise or motor action slight ticken from defrost clock any ideas guys. never done one suspect pcb if it has one lol :rolls:

    April 1, 2009 at 5:50 am #281862
    spimps
    Participant

    Re: aeg f/f

    On the the defrost clock ((mechanical type) there is a little recess which will take the end of a small screwdriver,just turn it 5 degrees clockwise.
    These clocks stick now and again switching off the appliance and stay in permanent defrost.

    April 1, 2009 at 8:38 am #281863
    adv
    Participant

    Re: aeg f/f

    hi they usualy do this one blanked off tho .was goin to try that. mite need to open it up. still hihk its mibe board tho :rolls:

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.