aeg f35080vI

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › aeg f35080vI

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • September 14, 2008 at 5:04 pm #39481
    bib
    Participant

    NO POWER TO MACHINE AT ALL, CHECKED ALL THE OBVIOUS CAN ONLY ASSUME PCB GONE ANY IDEAS??

    September 14, 2008 at 7:12 pm #262563
    Penguin45
    Participant

    Re: aeg f35080vI

    If there’s no power to the machine at all, surely you’re looking at the socket or fuse?

    Chris.

    September 14, 2008 at 7:15 pm #262564
    bib
    Participant

    Re: aeg f35080vI

    sorry Chris badly put by me got power to pcb but nothing coming on , no leds, got 230v into board but can only measure 160v coming out, dont mind ordering pcb but at £82+vat could be expensive mistake didnt know if anybody had come across this before, machine only 2-3 years old

    September 14, 2008 at 8:41 pm #262565
    Penguin45
    Participant

    Re: aeg f35080vI

    More or less got to be the board then…. I’ve fitted a few on this range, but too many customers saying ‘No’ these days 🙁 .

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.