AEG F65040IM0P ProClean Error code .00

[andy_48]

Intermittent error code:

>Turn on
>Select programme
>Press Start
Brief whirring noise
Flashing error code .00

>Turn off and restart – all’s fine.

I can’t find any info anywhere for error code .00

Can anyone help, please?

[electrofix]

Re: AEG F65040IM0P ProClean Error code .00

error 00 is a low voltage alarm. if voltage to dishwasher falls below 180v unit cuts out

you either have a faulty supply to the machine or a poss faulty board

Dave

[andy_48]

Re: AEG F65040IM0P ProClean Error code .00

Thanks, Dave

How can I determine which is more likely?

[electrofix]

Re: AEG F65040IM0P ProClean Error code .00

since it is unlikely that you whole house voltage is going up and down( unless you live in the middle of nowhere) I would plug it into another socket to eliminate the socket its plugged into first

Dave

[andy_48]

Re: AEG F65040IM0P ProClean Error code .00

OK. Many thanks.

[andy_48]

Re: AEG F65040IM0P ProClean Error code .00

This fault has developed slightly (or maybe I just didn’t spot the extra error earlier).

When first starting the cycle:
– the pump starts for a few seconds and stops
– then error .40 flashes for a couple of seconds
– then error .00 flashes.

If I turn the DW off and on again, the cycle starts and runs without issue. This is only a minor inconvenience (and is why I haven’t tried to fix it yet).

I’ve tried changing the socket so I don’t think it’s a voltage issue.

[Author]

Posts