- This topic has 2 replies, 2 voices, and was last updated 21 years ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
I have just found my AEG 4040 pump running even though the machine was switched off.
I have had a bit of a look (unplugged it first!) and have noticed a tiny split in the drain hose where it leaves the machine with a very fine jet of water spraying out. Could this have caused a short?
Is this a common fault?
😥 😥
Re: AEG Favorit 4040
it’s more likely the base has filled with water and activated the anti-flood protection switch.
You’ll need to check that as well as replcing the hose, once you’ve pulled the plug of course 😀
Leave it to dry out for a couple of days after the repair, it should (hopefully) have not done any damamge to electrical components.
Dave.
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.