- This topic has 3 replies, 2 voices, and was last updated 13 years, 2 months ago by
.
-
Posts
-
Went to this machine yesterday. Customer reported that the washing came out hot and wet on the drying cycle. I checked the condensation chamber which was completely blocked. I cleared this and thought I was on a winner! Refitted the chamber tried to restart the machine and the door switch packed in, changed that. When a drying program is selected the machine starts to tumble but the fan, water valve and heater fail to work. I have good readings on the heater, fan and water valve. Both thermostates are serviceable. There is no error code. There are no problems with the wash cycles. Insulation check is above 3 Meg. Have I missed anything before I condem the module? How is the test cycle entered on this machine which is very is much the same a the Zanussi washer Dryer? Regards Taff
Re: AEG L12710VIT Drying Cycle No Heat
I will revisit, what should the readings be? Thanks for the reply. Taff
- You must be logged in to reply to this topic.