AEG l16810 914601801/00

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG l16810 914601801/00

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 16, 2012 at 3:36 pm #67946
    loopey
    Participant

    AEG l16810 914601801/00
    at 1st washing was coming out hot and steamy on dry no error code .
    Getting the dreaded E20…..
    cleaned out condenser changed valve, checked pressure systom .
    Changed the ntc on the hose of the condenser.
    Heater has no low insulation every thing meggers out ok.
    pumps out ok water getting to condenser.

    clothes are nearlly dry when i get the error.
    How do i get in to diagnostic mode to check the real error code ..
    and has any one got any more idears as its driving me mad

    many thanks phil

    February 16, 2012 at 7:12 pm #369119
    Seamy
    Participant

    Re: AEG 1914601801/00

    On the hose from the condenser to tub theres an NTC, these have been known to throw up strange faults. You mention that its already been changed. Look at p.c.b for moisture on the tracks, sometimes if theres dust on them & it gets damp with condensation from dryer they can throw up erroneous faults.

    February 19, 2012 at 8:42 pm #369120
    whitevanman
    Participant

    Re: AEG l16810 914601801/00

    and the pumps running for how long?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.