AEG L63742VI Fault

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AEG L63742VI Fault

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 21, 2011 at 2:24 pm #64070
    neilbow
    Participant

    Hi folks I have a customer with a AEG L63742VI 9145282213 washing machine, you can put it on any programme, press the start button the start light comes on, the washing light comes on, the door light flashes until the door lock energise then the light stays solid, the pump comes on for about 2 seconds the washing light goes out then the start/pause flashes and the machine does nothing. unfortunately the machine is to new for our Distripart manuals.I have done the usual checked Element, Motor, Valves,any thoughts anybody Best Regards Neil Bowman

    July 21, 2011 at 2:35 pm #355966
    Criscold
    Participant

    Re: AEG L63742VI Fault

    Let me have your email and can send you a pdf

    July 21, 2011 at 11:34 pm #355967
    leavemetogetonwithit
    Participant

    Re: AEG L63742VI Fault

    Damp? Either motor or heater below 40meg insulation resistance.
    Mike.

    July 22, 2011 at 5:55 am #355968
    neilbow
    Participant

    Re: AEG L63742VI Fault

    Hi,
    Email is kenbowmanandson@hotmail.co.uk
    Many Thanks
    Neil

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.