- This topic has 1 reply, 2 voices, and was last updated 16 years ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
91452511500
Apparently, haven’t seen it yet, this machine will start the cycle ok but the cycle time will suddenly jump back to the original cycle length. i.e. The customer uses a cycle that is 117 mins long and the machine keeps jumping back to 117 mins.
My first thought was heater open circuit, but was just wondering if someone could suggest other.
Thanks.
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.