AEG OKO LAVAMAT 16800

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › AEG OKO LAVAMAT 16800

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • March 26, 2006 at 11:24 am #16662
    kwaziewabbit
    Participant

    🙁 This may sound like a stupid question…..and possibly is but can anyone tell me how to dismantle (get into the gubbins) of one of these blasted machines. 🙁

    I have a AEG OKO LAVAMAT 16800 which is leaking water, apparently from the right hand side of the machine (at the rear). I’ve had the machine on it’s side and felt around the pump which feels dry. Is there a guide as to how to either take the back or the base of this machine off.

    Any help much appreciated.

    Cheers

    March 26, 2006 at 8:14 pm #170924
    Penguin45
    Participant

    Re: AEG OKO LAVAMAT 16800

    You will observe a centre seam down the casing sides – the rear half can be removed by undoing 4 or 5 screws around the lower casing and four under the lid.

    Power off if removing any panel.

    Regards,
    Penguin45.

    March 27, 2006 at 2:46 pm #170925
    kwaziewabbit
    Participant

    Re: AEG OKO LAVAMAT 16800

    😀 Thanks much appreciated 😀

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.