AEG U3100-4-M bottom oven not getting heat

Home Forums Public Support Forums Help And Support Cooker And Oven Forum AEG U3100-4-M bottom oven not getting heat

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • #93317
    No.1
    Participant

    hi,

    Wondering if anyone can help me.

    I’ve got an AEG U3100-4-M double oven.

    At the weekend the bottom oven just stopped working (top oven works without issue).
    When turning the knob on the front to heat the Neon light doesn’t light up, however I can hear the fan at the back of the oven start and continue to spin, however no heat.

    I’ve tried replacing the Element, and Thermostat without success…

    My next step is to try and replace the Multifunctional switch, but running out of things to replace.

    anyone come across this before, or any better ideas.

    #453921
    electrofix
    Moderator

    Re: AEG U3100-4-M bottom oven not getting heat

    if that switch has gone you can probably see it.

    oven element is fed off contact P2 look at the switch contact for signs of damage

    Dave

    #453922
    No.1
    Participant

    Re: AEG U3100-4-M bottom oven not getting heat

    do you think that would also explain the neon light not coming on when the switch is turned?

    #453923
    electrofix
    Moderator

    Re: AEG U3100-4-M bottom oven not getting heat

    since if that contact is faulty then it feeds the element and the light so yes

    Dave

    #453924
    No.1
    Participant

    Re: AEG U3100-4-M bottom oven not getting heat

    Thanks Dave,
    I’ll get one ordered!
    fingers crossed

    #453925
    electrofix
    Moderator

    Re: AEG U3100-4-M bottom oven not getting heat

    beware on one model there are 2 switches depending on serial no

    production code 94417139600 has 2 up to serial 733 same as below after 349 04 39-01 / 9


    all the rest use 311 51 97-01 / 8

    Dave

    #453926
    No.1
    Participant

    Re: AEG U3100-4-M bottom oven not getting heat

    cheers, I’ll check the model before ordering, as I dont have it at hand

Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.