Amana American FF

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Amana American FF

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • December 11, 2009 at 5:10 pm #50883
    Steven
    Participant

    AC225GEKB Sn 1073480DEV
    Not been yet, have had a call from a customer saying that the ice/water dispenser not dispensing correctly.

    For example if you press the button on display for water then you get half water then suddenly the rest is crushed ice 😕

    Press ice button and you could get water. 😕

    So not dispensing the correct, ice / crushed ice / water in any order.

    Any known problems with this appliance, suggestions would be appreciated before calling ❓

    Steven

    December 11, 2009 at 8:55 pm #306236
    burns
    Participant

    Re: Amana American FF

    dispenser control board is the most likely culprit.
    67003623 should be the correct number but prior to date code 10 it was a twin layer dispenser board and after 10 it was a single layer board. This number should be the single layer, but please check with Maytag spares.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.