Amica ZWM416W slimline dishwasher.

Home › Forums › Manufacturer/WP/Insurer Specific Forums › Amica Trade Support › Amica ZWM416W slimline dishwasher.

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • September 21, 2011 at 9:34 pm #65209
    aqualectric
    Participant

    Confusing problem this…… 😕
    Set to any cycle, machine goes through the wash, rinse and then stops at the end – seemingly normal. Open the door and steam billows out and there is 1″ of water left in above the filter.
    I’ve repaired many of these Chinese Indesit clones but I can’t decide what is causing this fault. The machine fills, washes, heats and drains perfectly…apart from the end of the cycle. PCB maybe? Machine is 8 weeks old.

    Thoughts please…..

    Thanks,

    Steve.

    September 21, 2011 at 10:45 pm #359521
    kwatt
    Keymaster

    Re: Amica ZWM416W slimline dishwasher.

    If it does everything okay and doesn’t report an error it’s unlikely to be the PCB.

    Stumped beyond that TBH.

    K.

    October 7, 2011 at 8:18 am #359522
    nigegt
    Participant

    Re: Amica ZWM416W slimline dishwasher.

    Sounds like the program hasn’t completed yet maybe? Cust thinks it’s finished when it goes quiet but realy it’s still got 15 mins drying then it will drain that last bit of water.

    Nige

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.