- This topic has 1 reply, 1 voice, and was last updated 7 years, 9 months ago by
.
-
Posts
-
Hi all , I have an Amica zwm616w dishwasher that will not fill. It drains ok but no power is coming to the intake soloinoid valve.both pressure switches work ok as dose the float switch.there is one flashing lights that lasts for a short period of time and then it goes off any ideas what I might check next. I have yet to check if the circulating pump may be stuck/ blocked and maybe cause a circuit block to the inlet valve. Any advice is much appreciated, Crockett.
Re: AmicaZWM616W
crockett wrote:Hi all , I have an Amica zwm616w dishwasher that will not fill. It drains ok but no power is coming to the intake soloinoid valve.both pressure switches work ok as dose the float switch.there is one flashing lights that lasts for a short period of time and then it goes off any ideas what I might check next. I have yet to check if the circulating pump may be stuck/ blocked and maybe cause a circuit block to the inlet valve. Any advice is much appreciated, Crockett.
- You must be logged in to reply to this topic.