ananlogue meggar wanted

Home › Forums › General Trade Forum › ananlogue meggar wanted

Viewing 15 posts - 1 through 15 (of 15 total)
  • Author
    Posts
  • January 6, 2011 at 8:59 pm #60002
    boselecta
    Participant

    Hi

    My old analogue meggar has died. The only new ones I can see on the internet are digital ones.
    Does anyone know where I can buy or has a old analogue meter with a needle that they are willing to sell?

    Thanks

    January 6, 2011 at 9:44 pm #340384
    raw
    Blocked

    Re: ananlogue meggar wanted

    http://www.rapidonline.com/Tools-Fasten … e=googleps

    January 6, 2011 at 10:56 pm #340385
    helo_75
    Participant

    thats not a meggar though, is it

    January 6, 2011 at 11:13 pm #340386
    boselecta
    Participant

    sadly not as looks just the thing (almost), thanks anyway.

    January 6, 2011 at 11:15 pm #340387
    helo_75
    Participant

    i have a proper analogue one sat in the garage doin nowt,its a few years old, but works well, how much is it worth?

    January 7, 2011 at 7:01 am #340388
    johnmac11
    Participant

    Re: ananlogue meggar wanted

    what about this one HERE, it is bloody cheap too…..


    John

    January 7, 2011 at 7:59 am #340389
    allan73
    Participant

    Re: ananlogue meggar wanted

    Excuse my ignorance but why go for an analogue Megger ?

    January 7, 2011 at 8:31 am #340390
    Martin
    Participant

    Re: ananlogue meggar wanted

    allan73 wrote:Excuse my ignorance but why go for an analogue Megger ?

    They are a lot easier to read at a glance…………….plus you can demonstrate poor reading results to your customer more easily with a dial they can see rather than a digital number that means little or nothing to them. “If the reading was over this side lady it would be fine, your machine however reads over here and that’s real bad as you can see?”

    January 7, 2011 at 9:34 am #340391
    allan73
    Participant

    Re: ananlogue meggar wanted

    Do the analogue ones need to be sent away for calibration Martin ?

    January 7, 2011 at 12:09 pm #340392
    Martin
    Participant

    Re: ananlogue meggar wanted

    allan73 wrote:Do the analogue ones need to be sent away for calibration Martin ?

    Oh yes!

    January 8, 2011 at 2:30 am #340393
    leavemetogetonwithit
    Participant

    Re: ananlogue meggar wanted

    Last time I looked, a couple of years ago, there were plentiful used ones on e-bay very cheap and not necessarily clapped out.
    Mike.

    January 8, 2011 at 7:11 pm #340394
    Madmac
    Participant

    Re: ananlogue meggar wanted

    leavemetogetonwithit wrote:Last time I looked, a couple of years ago, there were plentiful used ones on e-bay very cheap and not necessarily clapped out.
    Mike.

    Be careful what you buy though, I thought the £24 one I bought was a bargain but it had an intermittent fault with the test button :rolls:
    Might open it up yet and see if it will fix…unless someone wants to buy it for £24 🙂

    January 8, 2011 at 7:52 pm #340395
    raw
    Blocked

    Re: ananlogue meggar wanted

    looked in workshop and we have these ones
    http://www.test-meter.co.uk/products/me … on-tester/

    http://cgi.ebay.co.uk/PRO-ANALOGUE-INSU … 3362eda1d6

    January 9, 2011 at 10:17 pm #340396
    boselecta
    Participant

    Thanks for the replies, over the weekend I was given a digital meter by a friend so I will see how I get along with that.

    January 10, 2011 at 5:16 pm #340397
    pete909
    Participant

    Re: ananlogue meggar wanted

    goggle up stewarts of reading theirs all sort there

  • Author
    Posts
Viewing 15 posts - 1 through 15 (of 15 total)
  • You must be logged in to reply to this topic.