Another parts problem please guy’s (TECNIK OVEN)

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Another parts problem please guy’s (TECNIK OVEN)

Viewing 9 posts - 1 through 9 (of 9 total)
  • Author
    Posts
  • #34250
    MANDELLS
    Participant

    Please could someone tell me the part number for the cooling fan(not the one inside the element) for a Tecnik TKC237 please, would be most grateful.

    #241834
    MANDELLS
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    Any ides guys,getting desparate now, cheers

    #241835
    aqualectric
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    I’ve used a Qualtex MTR215 many times – seems to fit most ovens.

    HTH,

    Steve.

    #241836
    MANDELLS
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    Thanks for that reply Steve unfort i dont have a Qualtex acc only connect and masterpart and ident part numbers please???? many thanks

    #241837
    Penguin45
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    UN1459 – L/H
    UN1460 – R/H

    From Masterpart.

    Chris.

    #241838
    MANDELLS
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    Hi again, i think we are getting our wires crossed as im sure thats for the hinges and not the cooling fan, so if you do have a connect pt number would be most gratefull,Cheers

    #241839
    ANDYVIVO
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    Hi
    UN1459 + UN1460 are cooling fan motors.
    Regarsd Andy

    #241840
    MANDELLS
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    Hi Andy, thanks for geting back to me but the pt numbers arn’t coming up on connect, any other ideas cheers Eric

    #241841
    Penguin45
    Participant

    Re: Another parts problem please guy’s (TECNIK OVEN)

    ‘Cos they’re Masterpart numbers………..

    Chris.

Viewing 9 posts - 1 through 9 (of 9 total)
  • You must be logged in to reply to this topic.